| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-11-2010, 01:44 PM
| |||
| |||
Have a Mori-Seki MH-80 HMC with a Fanuc 11M controller. Previous owner had it hooked up for DNC operation and we have tried with no luck to do the same...tried every different cable combination that we could. When I send to the machine from the PC the line tester flashes that it is recieving signal but nothing registers on the controller. When I try to output a file to the PC I get nothing... -Tape mode -Program -Punch -This program (the one I have called up on the controller) HELP! What am I missing??? Thanks, brian brian@jadcnc.com  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help with Fanuc OM DNC upload | darrylh | Fanuc | 15 | 12-05-2011 01:57 PM |
| Fanuc 0 TC Parameter Upload | rajesh_1355 | Fanuc | 1 | 07-05-2009 04:36 AM |
| Fanuc 6 M SW upload. | chinthakahk | Fanuc | 1 | 09-27-2007 06:59 PM |
| Fanuc 18i Comms Download & Upload | Mr_Carpyman | Fanuc | 2 | 06-26-2006 01:14 PM |
| Can't upload from PC to Fanuc 20T | Sigmo | Fanuc | 11 | 01-14-2005 12:16 PM |
| | |
Linear Mode
