FANUC Manuals

[gbowne1]

Here are two more manuals I have been looking for.

I am looking for the B-61394E, B-61397E, B-61434E and B-44193E manual.

They are the PMC manuals and the FAPT macro compiler programming manual and a Operation/Mainteance handbook from the Series 0/00/0-Mate C manuals.

I could also use the manuals for the "S" tyoe servos and servo amplifers. I have the alpha and beta servo manuals.

Greg

[guhl]

email with B-61397E sent

[gbowne1]

Thanks for that manual.

Would sure be nice to have the ladder manual.

I attached photos of the CRT/MDI and Op. panel I have for the 0M-C that I have.. except that my CRT/MDI keypad is not the colored version.

I am still looking for the key for the Operators Panel that goes to the program protect switch.

I also have the same op. panel for the 0T-C.. but a different 0T-C CRT/MDI

Greg

[John_B]

PM sent

[gbowne1]

PM Replied.

Greg

[kcho]

Hi! Anyone has the (B-55193E) PMC K/L/M ladder programming manual?

Please I really need it, cause I have to do a retrofit with a Fanuc 0TC in a Danobat lathe.

Best Regards

Carlos Cabrera

[gbowne1]

I am still looking for these manuals:

B-55193E FANUC PMC-Model K/L/M Programming Manual

B-61434E Graphic Conversion for Machining Center Parameter Manual

B-61392EN-1 Descriptions (Supplement for Remote Buffer)

I will also take the following servo and spindle servo manuals:

B-65142E
B-65152E
B-65162E
B-65165E
B-65150E
B-65160E

Thanks,
Greg

[greenery_fr]

I am still looking for these manuals:

B-55193E FANUC PMC-Model K/L/M Programming Manual

B-61434E Graphic Conversion for Machining Center Parameter Manual

B-61392EN-1 Descriptions (Supplement for Remote Buffer)

I will also take the following servo and spindle servo manuals:

B-65142E
B-65152E
B-65162E
B-65165E
B-65150E
B-65160E

Thanks,
Greg

Hello
This is B-65142E and B-65152E
http://rapidshare.com/files/332088193/Fanuc_manual.rar
This is B-65150E and B-65162E
http://rapidshare.com/files/332089557/65162.rar
This is B-65160E
http://rapidshare.com/files/332090266/65160e.pdf
Regards

[gbowne1]

Thanks for the manuals.

Still have a few more to add to the collection, but it's getting there.

Now I have PLENTY of reading material.

Greg

[sidswift]

I am looking for the maintenance manual B 65165E. Any help would be greatly appreciated.

Sid

[greenery_fr]

I am looking for the maintenance manual B 65165E. Any help would be greatly appreciated.

Sid

http://support.ge-ip.com/support/res...FZ65165E02.pdf

[sidswift]

greenery_fr

Thank you for your help, just what I was looking for.

Sid