Problem Ask for Fanuc OM-A M1/M2 connector signals - CNCzone.com-The Largest Machinist Community on the net!

david_chen · #1 12-20-2009, 03:46 AM

Hi all,
Does any one who have connection manual or electrical diagram of the machine use the Fanuc OM-A please help me address the signal name for each pin of M1/M2 connector without PMC
Thanks
David

hrh · #2 12-21-2009, 07:09 AM

Let me know which Master PCB you are using.

david_chen · #3 12-21-2009, 07:33 AM

Originally Posted by hrh

Let me know which Master PCB you are using.

The master print PCB of OM-A is A16B-1010-0150

hrh · #4 12-21-2009, 12:56 PM

Please forward your e-mail address in private messaging.

I will send a drawing snapshot of the connectors.

gbowne1 · #5 12-21-2009, 08:50 PM

Do you have this for the 0M-C?

Greg Bowne

guhl · #6 12-22-2009, 02:51 AM

Originally Posted by gbowne1

Do you have this for the 0M-C?

Greg Bowne

PM sent

hrh · #7 12-23-2009, 08:35 AM

Yes, for 0M-C as well.

charm_raja · #8 03-18-2011, 03:59 AM

Hai
I have fanuc tap drill fanuc OM mate A system,
i need the Circuit Diagram of in this Machine because I m facing the somany problems
It shows 2001 and 2002 and 2004 message

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem- Fanuc 15M Input Signals Error	cevyil	Fanuc	4	12-19-2008 01:56 PM
Newbie- Fanuc Series Connector	Lacky	Fanuc	3	06-18-2008 06:58 PM
Differential Encoder Signals	eloid	DIY-CNC Router Table Machines	8	01-29-2008 08:05 PM
Ask for Fanuc 10M/T DI/DO connector signals	Jung	Fanuc	2	12-26-2007 08:59 PM
To convert Quadrature Encoder signals to Tachogenerator signals	Babar	General Electronics Discussion	4	02-21-2006 12:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)