system variables for milling offsets on 0i series

[sinha_nsit]

When the available offset numbers are not greater than 200, #2001 through #2200 can also be used in place of #10001 through #10200. Similarly, #2201 through #2400 can be alternatively used for #11001 through #11200.

This is for H-offset.

Do we have similar options for D-offsets on 0i M series (e.g. #2401 through #2600 and #2601 through #2800)? There is no mention of 2401-2800 variables in 0i manuals.

It is rather unusual that the option is available for H-offset, but not for D-offset! Can some 0i user please confirm this.

[chucker]

Try 12001 to 12999

[sinha_nsit]

Yes.
#12000 and #13000 series are of course available for D-offsets.
What I want to know is whether #2400 and #2600 series are also available.
Peter Smid says that in his book on custom macros, but it is not mentioned in Fanuc's 0iM manuals. Since there are several errors in his book, I cannot believe him blindly. I do not have 0iM control, so I cannot verify this. So, I started this thread.

Just execute #1 = #2401 and #2 = #2601 in MDI mode. If there is no alarm, #2400 and #2600 series are available.
Thanks for your time.