| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-07-2009, 11:22 AM
| |||
| |||
We are trying to set up a SNK HBM with a rotary (B) and a Tsudakoma (A) to cut in Inverse time. B axis is a little jerky.I have all the loop gains set the same and the feed forward funtion turned on in all axis but all axis are not coordinated. any Help would be great. The control is a Fanuc 16i-MB Thanks Jon  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Inverse Time feedrate for 4th Axis | slideleft | Haas Mills | 2 | 12-08-2008 09:39 PM |
| milling time (not to be confused with hammer time) | barefoot0 | G-Code Programing | 4 | 05-02-2007 06:18 PM |
| G93 Inverse Time Feed Mode | MarkT | Haas Mills | 2 | 01-18-2007 12:28 PM |
| Inverse time feeds with a 4th axis | nervis1 | Fadal | 1 | 11-05-2004 11:43 PM |
| Mach2 Faro Arm Inverse Kinematics | vacpress | General CAM Discussion | 7 | 05-28-2004 09:14 AM |
| | |
Linear Mode
