Fanuc A16B-1200-0270 Buffer board..?


Page 1 of 2 12 LastLast
Results 1 to 12 of 14

Thread: Fanuc A16B-1200-0270 Buffer board..?

  1. #1
    Registered Leblondmakino's Avatar
    Join Date
    Oct 2007
    Location
    United Kingdom
    Posts
    179
    Downloads
    0
    Uploads
    0

    Default Fanuc A16B-1200-0270 Buffer board..?

    Does anyone know what this board is..?

    A16B-1200-0270

    I bought a machine with Fanuc 6MB11 a couple of years ago and this board was attached inside the cabinet door but not connected in any way..
    I'm told it is a buffer board for drip feeding..?

    If it is I would like to connect it!

    Thanks

    cnc-it

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    988
    Downloads
    0
    Uploads
    0

    Default

    I have the description manual for that board (B-90699E/03) and have the board too, but have no actual experience using that. It can be used on the 5,6,7,9,11,12,200A/B,3000C and 2000C controls.



  3. #3
    Registered
    Join Date
    Dec 2009
    Location
    Toronto
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default A16B-1200-0270

    REMOTE BUFFER FOR OLD NC

    You do need to setup parameters to run your DNC. This board has jumpers which need to be set
    correctly.

    Remote Buffer:
    INPUT DEVICE 1 = 1
    INPUT DEVICE 2 = 0

    FOR REMOTE BUFFER, you need to set communication parameters by using jumpers on the REMOTE BUFFER PCB.
    You need the manual : B-90699E/03 which has details about jumpers.

    Last edited by FanucGuru; 12-07-2009 at 04:58 PM.


  4. #4
    Registered Leblondmakino's Avatar
    Join Date
    Oct 2007
    Location
    United Kingdom
    Posts
    179
    Downloads
    0
    Uploads
    0

    Default

    Thanks Guys I'll try and get the manual as there are no cables with mine so I will have to make some.
    I presume then that this is a Fanuc version of a BTR and replaces the tape reader..?



  5. #5
    Registered
    Join Date
    Jun 2008
    Location
    china
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Buffer board A16B-1200-0270

    Quote Originally Posted by cnc-it View Post
    Thanks Guys I'll try and get the manual as there are no cables with mine so I will have to make some.
    I presume then that this is a Fanuc version of a BTR and replaces the tape reader..?
    I have the buffer board A16B-1200-0270 too but I don't know how to set the jumper.I know this board is a Fanuc version of a BTR for DNC operation.Can any one help me set the jumper or get the manual?
    Thanks
    David



  6. #6
    Registered Leblondmakino's Avatar
    Join Date
    Oct 2007
    Location
    United Kingdom
    Posts
    179
    Downloads
    0
    Uploads
    0

    Default

    Hi have managed to get The Fanuc remote buffer descriptions manual B-90699E/03 . It doesn't detail how to connect the board to the Fanuc 6 motherboard. It looks like I run the tape reader ribbon cable that already goes into the motherboard from the remote buffer then connect the tape reader to the remote buffer? Just need to make sure on this before I try anything!
    John.



  7. #7
    Registered
    Join Date
    Sep 2008
    Location
    morocco
    Posts
    66
    Downloads
    1
    Uploads
    0

    Default

    i want anstall a board remort bufer A16B-1200-0270 ,but i dont hav manual B-90699E/03
    if you hav send me by email : lmostafa@hotmail.fr
    thaks
    best regards



  8. #8
    Registered
    Join Date
    May 2004
    Location
    United Kingdom
    Posts
    393
    Downloads
    0
    Uploads
    0

    Default A16B-1200-0270

    John,
    Did you ever get the A16B-1200-0270 remote buffer working? I'm looking to put one on my Fanuc 6M ?

    I see you sourced the manual for it - was it in electronic format - if so can I be cheeky and ask for a copy to andrew@mawson.org.uk

    I've tried pming you but your inbox is full!

    Many thanks

    Andrew

    Andrew Mawson
    East Sussex, UK


  9. #9
    Registered
    Join Date
    Oct 2006
    Location
    MEXICO
    Posts
    79
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc A16B-1200-0270 Buffer board..?

    Quote Originally Posted by memoryman View Post
    I have the description manual for that board (B-90699E/03) and have the board too, but have no actual experience using that. It can be used on the 5,6,7,9,11,12,200A/B,3000C and 2000C controls.
    Do you have the manual in PDF ?
    sgarciam2@yahoo.com
    Thnak You



  10. #10
    Registered
    Join Date
    Sep 2010
    Location
    france
    Posts
    116
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc A16B-1200-0270 Buffer board..?

    THIS PCB IS A TAPE READER EMULATOR WITH
    YOU HAVE TO CONNECT IT ON THE HE50 CONNECTOR OF THE TAPE READER
    SELECT RMT IN THE SETTING SCREEN
    YOU SEND BY RS232 YOUR PROGRAM AND THE COMMUNICATION SHALL STOP AT SOMETHING LIKE 4MB (BUFFER FULL )
    THEN CYCLE START



  11. #11
    Registered
    Join Date
    Jun 2008
    Location
    china
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc A16B-1200-0270 Buffer board..?

    Quote Originally Posted by tmbruno28 View Post
    THIS PCB IS A TAPE READER EMULATOR WITH
    YOU HAVE TO CONNECT IT ON THE HE50 CONNECTOR OF THE TAPE READER
    SELECT RMT IN THE SETTING SCREEN
    YOU SEND BY RS232 YOUR PROGRAM AND THE COMMUNICATION SHALL STOP AT SOMETHING LIKE 4MB (BUFFER FULL )
    THEN CYCLE START
    It sound good,please tell me how to set the jumper and the comunication protocol

    Thanks
    David



  12. #12
    Registered dh08td's Avatar
    Join Date
    Feb 2015
    Location
    11111
    Posts
    58
    Downloads
    3
    Uploads
    0

    Default Re: Fanuc A16B-1200-0270 Buffer board..?

    Quote Originally Posted by lmostafa View Post
    i want anstall a board remort bufer A16B-1200-0270 ,but i dont hav manual B-90699E/03
    if you hav send me by email : lmostafa@hotmail.fr
    thaks
    best regards
    Can you share me these documemt to my mail: dien08td@gmail.com
    Thanks



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc A16B-1200-0270 Buffer board..?
Fanuc A16B-1200-0270 Buffer board..?