Need Help! TAKISAWA TK2 FANUC OMC - SP NOT WORKING IN AUTO - CNCzone.com-The Largest Machinist Community on the net!

rajesh_1355 · #1 12-05-2009, 10:21 AM

Dear All ,

I have a Takisawa TK-2 CNC mc with Fanuc - OMC having 2 axis. In this mc Spindle is not working in Auto mode. It is working in JOG mode OK. Machine was under breakdown for Mother bord's Memory card repair & after that Fuzi Ac Spindle drive repair. Finally restoring all data Parameter & PLC Data. Now spindle problem is there.

I don't have Elect. Ckt & Ladder.

Pl help.

Thanks.

Al_The_Man · #2 12-05-2009, 10:34 AM

The spindle is controlled by the PMC and the 0MC should be capable of displaying the ladder, you may have to resort to this to trouble shoot.
The pertinent rungs should also share the JOG mode for spindle.
P0060 #2 turns the ladder display on.
Al.

shaileshv@gmepl · #3 01-02-2010, 07:42 AM

Dear All
we are facing a problem in TAKISAWA TM20 related to Turret not working.
this problem was generated all of sudden at the time of m/c running.
we have checked turret bit by manually rotating the Encoder, all the bits are ON/OFF
but not set as per tool No.

pl. help me how to set the turret encoder?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Takisawa TC-1 FANUC 0TC	alexfanuc	Fanuc	0	10-23-2009 10:23 AM
Takisawa TC-1 Fanuc 0-TC	Dave1	Fanuc	12	11-14-2008 09:45 AM
Need Help!- Takisawa TC-1 with Fanuc OT	Nilesh Patel	Fanuc	2	10-23-2008 01:13 AM
Need Help!- Takisawa/Fanuc 3T	hammerdown	Fanuc	0	10-17-2008 09:06 AM
Takisawa not working properly after exhnge mainboard	erikturn	Fanuc	1	10-20-2006 11:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)