Need Help!- GE FANUC SERIES 150M

[M.RISHIKESH]

Kindly let us know on how to input Fanuc Option Parameters (9000 series)

We tried following :

Without removing PMC cassette from Base 1 board, if we press 7 & 9 together and sw ON the controller then we get on screen " Graphic CPU Ready ROM : Series 6210 - 06 (Version F) 17 Sept 1993Display : 14 inch CRT ", if we press CNC/PMC key we are able to get into IPL Menu with 6 options (Option 6 - End IPL) & below 6 there is a ? mark

b) To change 9000 series parameters, we inputted 1st password by typing 23678625 just beside ? mark, below option 6, in IPL menu, then pressed Input

c) We inputted 2nd password by typing 37264699 just beside ? mark below option 6 in IPL menu, then pressed Input

d) We inputted 3rd password by typing 19261161 just beside ? mark below option 6 in IPL menu, then pressed Input

Even after inputting all 3 passwords, we are still getting IPL menu with 6 options and we are not getting any field to input say Number of axes & then 9000 series Fanuc Option Parameters

Please advice

Best Regards,

M. Rishikesh

[stevo1]

Probably Eastern control.

PM sent.

Stevo

[memoryman]

the 15ea control has different passwords 40512144; 25406856; 19291069.
To get into the IPL screen press and hold - and . keys. 7 and 9 clear all memory.
the 15a control with digitizing has different password again.
Bill