FANUC-OM

[CHANDRU]

FRIENDS,

BELOW IS MY OBSERVATION IN A MACHINE WITH OM CONTROLLER.
THE VALUES ARE TAKEN AFTER CHANGING THE BIT 7 IN PARAMETER 19 TO 0-1-0
TIMER - DECIMAL VALUE - BINARY DISPLAY
DGN 300 -1200000 - 11000000
DGN 305 - 300000 - 01110000
DGN 310 - 5000 - 01100100
DGN 315 - 500 - 00001010
DGN 320 - 150 - 00000011
DGN 325 - 250 - 00000101
DGN 330 - 150 - 00000011
WHEN I MULTIPLY THE BINARY VALUES WITH A CONSTANT OF 50 SAY FOR EXAMPLE DGN315 IS 10x50 =500
FROM DGN 310 ONWARDS IF WE MULTIPLY THE BINARY VALUE WITH A CONSTANT OF 50 WE ARE GETING THE DISPLAYED DECIMAL VALUE.
BUT NOT SO IN THE CASE OF DGN 300 AND DGN 305.
PL HELP ME.

AS I NEED THIS INF VERY BADLY BECAUSE MANY MACHINE BUYERS EITHER HAVE THE DGN PARAMETERS IN DECIMAL(IN THAT CASE IT IS EASY) BUT SOME TIMES IN BINARY.
THANKS,
CHANDRU