Need Help!- download plc

[hongjianming]

dear all
how to download pmc ladder from fanuc 0i/18i/31i.not parameter.
thank all

[fanucman]

press system
pmc
I/0
output to memory card
select data type as ladder
press execute

[hongjianming]

hello fanucman
thank you
i cannot find i/o softkey in fanuc32i.

best regards

hong

[udrııl79]

thanks.

thıs method for download

I want to leorn,

ladder = plc ?? SAme ??

what is the ladder upload method ?

how to install the ladder.?

I am a rookie in service. I learned a lot from this forum

thanks

[f-bu]

try SYSTEM > > PMCMNT - I/O

[udrııl79]

wıll we select Read ?

[f-bu]

SYSTEM > > PMCMNT - I/O - MEMORY_CARD-WRITE-SEQUENCE_PROGRAM
Enter some file name, INPUT, EXEC

[udrııl79]

status has also changed ladder cnc.

and we can install these instructions ladder.

;Hello neighbor country.

ı m from turkey / istanbul.

[f-bu]

Komshu, this sequence was for writing PMC program (called also ladder) to memory card. What you want to do? If you want to install a new ladder from memory card, you must select READ instead of WRITE in the above mentioned. Be VERY CAREFUL, the machine can be dangereous with wrong ladder!

[udrııl79]

ало. Брат ми



I know

Manufacturers will send the ladder to be installed

[Osmanselim]

Why do you need new ladder ?
your machine LAthe or vertical center ?

Who is the Manufacturers


thanks Hemşehrim

[udrııl79]

DEAR ,,
We are pushing feed hold button (any where - at any time in automatic working )
chuck and coolant are stopping. it s normal.

after,

We are repeat pushing cycle start when chuck starting but coolant isn't working ( auto coolant lamp running )
We'll have to manually press the manuel coolant button again. ( or tools are corrupted )

is pressed to start the water flowing again.