| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-16-2009, 07:55 PM
| ||||
| ||||
Hi All, I am having an RS232 Communication Alarm: BG806 Device type mismatch. Bit of a brain teaser that I don't think should be very hard, but I am missing something. I restored factory parameters on a Fanuc 15M-A from a backup file. When I send a program to or from the machine at the end of the data transfer I get this alarm. If I go and look at the program for example from the PC to the machine. It loaded correctly and runs fine. I played with all the communications parameters for a few hours trying different things with no luck. The machine has two RS232 input devices. Both the RS232 and a tape reader. The RS232 port is plugged into I believe CD4A port and Tape is CD4B. Any ideas? Thanks
__________________ www.machinetoolhelp.com  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Part Straightening Device | yoopertool | Mechanical Calculations/Engineering Design | 3 | 07-13-2009 05:59 PM |
| Help with THK rails & blocks (mismatch?) | daemonfly | Linear and Rotary Motion | 6 | 03-06-2009 07:31 AM |
| Partner 1 Series G- CMOS display type mismatch | life3970 | Milltronics | 0 | 01-31-2008 09:00 PM |
| Using a pc as a dro device.. | hotponyshoes | General CNC (Mill and Lathe) Control Software (NC) | 4 | 02-21-2007 09:58 AM |
| modbus device | Drew | Machines running Mach Software | 14 | 02-11-2007 01:59 PM |
| | |
Linear Mode
