PC MONITOR FOR FANUC

[CHANDRU]

FRIENDS,

HAVE ANY BODY IS USING A PC MONITOR FOR A FANUC CONTROLLER.
IF SO PL SHARE THE DETAILS.

THANKS,

CHANDRU

[henry95]

You need a FOCUS 1/2 Windows drivers/library, A02B-0207-K737, about $18. Then if you don't have the machine to try your code, you need a FANUC software simulation (About $5,000 per license).
Then last you need a sample codes, hopefully, it goes with the simmulation packahe. you can contact FANUC America.
I am now looking for a sample code my self!! (poor me!!).