| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-01-2009, 03:36 PM
| |||
| |||
we got a parity alarm on our yang eagle with a fanuc 0MD control. We replaced the batteries and cleared memory with <reset><del> keys. According to Fanuc we need to hand load the 900 parameters first. About half of the 900's will not load. we also cannot load any of the PMC parameters in the diag. pages. Any ideas would be appreciated.  |
|
#2
07-01-2009, 07:45 PM
| |||
| |||
| Press EM Switch in, OPR page need to turn on Key Switch also PWE= 1 Ahn Vuong |
|
#3
07-01-2009, 08:01 PM
| |||
| |||
| First need to input parameter 910 to 930 Power off Power on then you should able to input parameter 900 to 909 Ahn Vuong |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- FANUC 31i load program | Bama | Fanuc | 1 | 04-18-2010 03:22 AM |
| Problem- Can't load program to Fanuc 21i-m | dpy | Machine Problems, Solutions , Wireless DNC, serial port | 10 | 04-09-2009 05:18 AM |
| can't load programs to Fanuc | rookieee | Machine Problems, Solutions , Wireless DNC, serial port | 11 | 02-22-2008 06:23 PM |
| Coding tool load values with parameters? | mystiks | Daewoo/Doosan | 2 | 12-31-2007 11:03 AM |
| Fanuc 0M PMC load | ETNOM | Fanuc | 4 | 05-27-2006 02:21 PM |
| | |
cannot load 900 parameters on Fanuc 0M-D 
Linear Mode
