Training required for Fanuc21im

[Cordellgroup]

we have just bought a CNC milling machine with a fanuc 21im controller, is there anyone in the UK can provide operator training on programming the machine

thanks

peter

[TURNER]

Originally Posted by Cordellgroup we have just bought a CNC milling machine with a fanuc 21im controller, is there anyone in the UK can provide operator training on programming the machine thanks peter

Hi Peter,
We have purchased some new machines in the U.K., and had training courses on m/c and fanuc. Dont know what your machine is but the supplier for Daewoo is
http://www.millscnc.co.uk
Weve had training on fanuc from here.
We have a few 18i, 21i controllers.
best of luck
Keith.

[Cordellgroup]

keith

thanks for that, i will check them out

the machine we have is a Butler Elgamill Travelling Column Milling & Boring Machine, Retrofitted with GE Fanuc 21iM Control

we already have a manual version of the machine, so its just the basics of the programming we would need to be shown

I have already contacted GE and got thier prices

thanks

peter