18iB control. - CNCzone.com-The Largest Machinist Community on the net!

cncdiag · #1 05-05-2009, 01:43 PM

Does any one have the procedure for reloading option parameters on the 18iB control? My customer only has a hard copy of parameters.
If so please send a PM

jdeere4250 · #2 05-05-2009, 07:19 PM

Weeelll ! it depends on a few things. Older ones, type in the 99xx parameters. newer ones had 3 sets of 8 digit passwords. newest ones they are in from.
what machine tool make and model and year cnc built?

fanucman · #3 05-11-2009, 11:57 PM

Originally Posted by cncdiag

Does any one have the procedure for reloading option parameters on the 18iB control? My customer only has a hard copy of parameters.
If so please send a PM

depends how old the software is.. try setting the 9900's first by hand.. if it takes them good if not ur gonna need fanuc to come in and reload it for ya.. which is usually a good idea because they will give you a sram back up so if you dump memory by accident you will have a backup..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need to replace Dynapath 20 control with new control	Cycle Start	Knee Vertical Mills	3	08-08-2010 03:14 PM
Need Help!- Seig x2 Speed Control and c6 Control Board	skmetal7	Benchtop Machines	2	04-21-2008 03:17 PM
15i control help for (AiCC) (hpcc) high precision contour control programming	gibbsmaster	Fanuc	2	12-28-2007 09:57 AM
Using Flashcut CNC Spindle rotate card control to control laser power	pyroplotter	FlashCut CNC	0	10-15-2007 09:46 PM
BobCADCAM Layer Control / Snap Control	jonbanquer	BobCad-Cam	0	01-21-2006 03:10 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)