Need Help!- pls. help

[traxxtito]

hi all
please help
i have router machine with control LNC-510i from taiwan
pls. i have big problem with auto tool changer
pls. can any one send to me macro programs for this ( O9001-....etc )
i think the problem on them
pls. reply me on my personal mail
tarek_atef_497@hotmail.com
with in site

[stevo1]

I have no macros for this machine but if you tell us your problems we might be able to work through the problem. Please be descriptive when explaining the issues.

Stevo

[traxxtito]

thanks stevo
just today i solved this problem for auto tool change cycle.
this was related to we were have worng macro program is called O9001.
i got it ... now auto tool changer run .

but i had another problem .... our spindl speed out of control .
our machine spindl working with maximum speed ( 24000 RPM )

can you help me on this ????

[stevo1]

Can you be more specific? Are you saying that no matter what you program for a spindle speed via M3S() the spindle always turns on to 24k RPM?

Stevo

[traxxtito]

yes thats right
when i typing ( M3S5000 for ex. ) machine working by maximum speed
not read my specific speed
this hapeend in autmatic mode and MDI mode
no replay from machine to my speed order

[joblo]

Have you managed to change your spindle speed yet?
I have recently bought a router with a Lnc 510i controller and I have the same problem where I cannot change spindle rpm with the controller or gcode.
The nuttons for manually changing the rpm on the controller dont even work.
It is possible to change rpm down from 24000 by adjusting the inverter, but thats not very good when you are running a number of different tools on the part your cutting.
Any help would be appreciated.