Reply with QuoteTo my knowledge, the 10M had an option for polar interpolation, but the 10T did not.
Polar interpolation on 10T
Hi
How to compel my Tsugami NU4B lathe (no Y-axis) with 10T control to execute polar interpolation?
Similar Threads:
To my knowledge, the 10M had an option for polar interpolation, but the 10T did not.
But in manual G12.1/G13.1 - polar interpolation mode on/off.Originally Posted by Dan Fritz
I really don't know the option parameter.
I get confused when talking about polar interpolation. One way I learned was being able to call a length and angle "G01 Z-.2 E20.0" for a line .2 from Z zero at a 20 degree angle. The other was for live tooling and milling contours. Which is which? What are you needing to do?
I need to make this part on the lathe with live tooling. My manual says that in case of G12.1 rotary C-axis represented as stright axis.
Info sent via email
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Thanks
Info may be posted here also for the benefit of others, unless it is not possible due to large file size.
Posting Permissions
