Need Help!- Fanuc redcap motors and drives

[Jonne]

Hello!

I have problem. I need pinouts for Fanucs AC-drives. Machine's circuit
diagrams only show connectors, but not whats going on single pin.

Machine is Hartford VMC 1000 with Fanuc 0M.

Here's some photos:

[John_B]

Jonne,
Which series is your control, A, B, C? I have some info I can get you if you narrow the scope. The exact wiring will be largely machine tool builder specific though.

Rgds,
John B

[Jonne]

Model is Fanuc 0M-B. You can answer directly to my e-mail:

johannesthelen(at)hotmail.com

[John_B]

Jonne,
Sorry to lead you astray, the documents I have are for the C & D. Maybe Dan Fritz of one of the other pro's can assist you.
John B

[Jonne]

No problem, I'd like to see those too. Can you send me those to my e-mail?

[John_B]

Files sent. Hope your hotmail account can handle the zip file, it's almost 15mb. Don't know if you'll find what you need but there is a lot of good info in the manuals sent.
Rgds, John

[moghul]

hello jhon
can u also send me hartford manual?
i have hartford vmc560 with fanuc om.
thanks
m. shabbir mughal

[gbowne1]

Too bad all I have is the C & D versions, plus the Oi manuals too (still missing a few of those).

I have manuals for drives, but not the DC servos/VCU's or the C & S type.

This VMC looks alot like one that I built, sized for my garage.

I had fun trying to wire my S series A06B-6058-Hxxx / A06B-6059-Hxxx drives.