Need Help!- 065 Illegal command in G71-G73

[jdgromi]

Hello!

I am a newbe in cnc control. I have a ROMI17 with Fanuc 21i-T. When I want to do a cross roughing automatic, this message occure.
How can I fixe it?.

[GPena]

Send us the program to see where the problem is...

[jdgromi]

Hello! Gpena
There is my program:
N10 S850 M3 ;
N30 G72 W,08 R,03;
N50 G72 P60 Q140 U,030 W,010 F,010;
N60 G0 Z,190;
N70 G1 X1,74 F,005;
N80 X1,625 Z,250;
N90 X1,375;
N100 G3 X1,125 Z,375 R,125;
N110 G1 Z,5;
N120 X,875;
N130 X,500 Z,625;
N135 Z,750;
N140 X0,0;
N150 G41;
N160 G70 P60 Q140;
N170 G40;
N180 X3,0 Z3,0;
N190 M30;
Normaly it would be running easily.

Thank

Best Reagrds
Jean0Denis

[GPena]

Change G40 for G80 to cancel the canned cycle. I am not sure if this will work but the rest of the program looks ok to me.

Greg.

[jdgromi]

I will test the command right now.
Thank you

Best Regards

Jean-Denis