12-08-2008, 12:46 PM
|
| | | Join Date: Feb 2005 Location: UNITED STATES
Posts: 1
| |
Fanuc 6M
When I double click the OFFSET button the work offset screen does not appear. What can I doto solve this.?
I am a retired home hobby-machinist and I bought this machine on eBAY. It is a Swiss Riveting Shisouka vertical mill and came from DE ANZA COLLEGE somewhere near San Francisco. It appears to have a fanuc 6m control series 02; 901 eroms on 20B-0008-0410.
The Mboard appears that it may be a B configuration but there isn't a board in the far left slot.The bubble memory card is 64-1 A87L-0001-0015-C. I haven't been able to determine its capacity but I have uploaded 9K without a problem. It came with a short cord that appears home made with a 50 pin connector that will connect to the slot on the Mboard where the tape drive connects. I haven't made that connection because I don't want to damage the Mboard etc.. The 50 pin connector is held together with dental floss.
Last edited by barry stevens; 12-08-2008 at 12:49 PM.
Reason: I didn't ask a question
|
Linear Mode
