Fanuc Oi-TC control on a Dalian lathe

[jeep534]

The following was copied off of dallian's web site.... Is there someplace where I can find information on that control and what actually is "Manual Guide i" I am looking to purchase one of those lathes but cannot find info on the control except what is on the Clausing web site. What am I missing. I do have the Brochure but it only says that the machine can be fitted with Fanuc,Siemens,Fagor ect controls...

Six different models make up the Dalian Z Series. All are quality, low-cost CNC combination lathes with the latest Fanuc Oi-TC control, plus Manual Guide i conversational programming – perfect for the first-time CNC buyer, giving increased versatility and output.

Thank You
archie =) =) =)

[dcoupar]

Here's a couple of things to read up on Manual Guide-i

[jeep534]

Originally Posted by dcoupar Here's a couple of things to read up on Manual Guide-i

Thank You.... I was wondering a few other things about the control it's self. does it support a network connection. can you drip feed the control or how do you get programs in and out of it. I did notice a db25 connector on the side of the operators station on the front of the lathe. I thought that was odd because that part moves long the bed. i would have thought that sort o connection would have been in the back of the lathe.

archie =) =) =)