LinkBack URL
About LinkBacks
Parameter #0020 is the I/O channel.
| | |
Hey,
Anyone know what the Fanuc 16i parameters are for the I/O Channel? Want to G10 the channel from Dataserver to Serial on the fly.
Parameter #0020 is the I/O channel.
Thanks for the responce! I've got the Fanuc DVD, but it's not much better to navigate than the old yellow books. Do you happen to have the I/O channel specs? 5 is Dataserver, 0 is serial, I think 2 is sram card. Don't know the rest....
This might help a bit.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
This is from the 16i Parameter Manual.
Posting Permissions
| | |
