Need Help!- VMC - SUPERMAX 60A parameter lost

[rajesh_1355]

Dear All,

I have lost m/c parameter of SUPERMAX 60A VMC with Fanuc OMC controller.
Pl help me if any body have it.

Thanks.
rajesh_1355@yahoo.co.in

[rajesh_1355]

I have tried with the data of LEADWELL VMC m/c now all axis are working fine. But Spindle gears are not changing. When running with S3000 M03 command its running but at the RPM of around 1200.
Any help pl.

[rajesh_1355]

Dear All,
I am osing hope.
Can anybody help ?

[GPena]

Did you load the PC parameters (timers, counters, keep relays)??? they are important for this issue.

GP.

[rajesh_1355]

Dear Sir,
If I would have been had these data, I definitely cold have entered in m/c.
I do't have the original data.

Regards.

[Jung]

Originally Posted by rajesh_1355 Dear Sir, If I would have been had these data, I definitely cold have entered in m/c. I do't have the original data. Regards.

Para#516: adjust gain (usually =1000)
Para#539: Gear high max
Para#540:Gear high min
Para#541: gear low max
Para#542: spindle max
Para#543: spindle min

Hope this help

[rajesh_1355]

Dear Sir,

I need mc parameter & PLC data of the m/c.

Pl help me if any gentleman have it.

Regards.