Need Help!- cant send Om control tool change macro

[Osmanselim]

hi,
I have Om kontrol
I send standart part program but Tool change macro program not accept machine

Give me alarm 087 buffer overflow,
I try the wrıte Macro program Not open O9000
and On Mdı panel not have "[" "]" "#" like these

but in offset setting there MACRO have
I see macro variable

Please Help

[samu]

you have to set parameter #10 bit 4 (5th from the right) to 0 (xxx0xxxx).

You need to be in MDI mode and PWE must be set to 1

[Osmanselim]

I am not try Mdı Mode and write enable position I will try thanks

[samu]

Originally Posted by Osmanselim I am not try Mdı Mode and write enable position I will try thanks

It is to change parameter value that you have to be in MDI and PWE=1, not to output your program.