| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-08-2008, 12:33 PM
| |||
| |||
I have a 1984 Matsuura MC-1500 w/4th and 5th axis and a 6M-B control. My problem is that after it is shut down and powered back up the work offsets for the 4 & 5th axis change. It is never the same amount. The table was recently added and I'm thinking that a parameter was not changed that should have been. This is not an issue with X,Y,Z. Otherwise the machine seems to be running just fine  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mach 3 work offset retention. | Geoff86 | Machines running Mach Software | 9 | 01-30-2010 02:03 PM |
| Work Offset Question | Cartierusm | Mach Software (ArtSoft software) | 17 | 11-29-2007 03:50 PM |
| Running one work offset. | ltmquik | Haas Mills | 20 | 09-07-2007 01:02 PM |
| Changing Work offset from the program | WITOMCIO | Haas Mills | 16 | 05-14-2007 07:40 AM |
| work offset in fanuc 6m b- help | rags | Fanuc | 14 | 08-03-2006 09:39 PM |
| | |
Linear Mode
