Fanuc 21iT - CNCzone.com-The Largest Machinist Community on the net!

Stebedeff · #1 09-25-2008, 06:28 AM

Hi there,

Just curious if anyone knows which parameter i need to change so i can turn the turret counterclockwise. There is a F2 button which i'am suppose to press in a at the same time as i press "TURRET INDEX" but this F2 doesn't work. As wel as there's a F1 button too which i not know what it's for. i was hoping it's just to turn the turret infinate till you leave it loose. Now that would be handy! But that too doesn't work.
Thanks for any help!

Triv · #2 09-25-2008, 08:58 PM

Fanuc controls behave differently via different machine builders.

Who's machine do you have?

phix · #3 09-25-2008, 08:59 PM

From my experience, bi-directional turret indexing has been a PMC (machine side) parameter, not an NC (Fanuc) parameter.

It's probably a keep relay setting.

What kind of machine is this?

Stebedeff · #4 09-26-2008, 02:13 AM

It's a COLCHESTER TORNADO 110B.

xavierdemoura · #5 09-26-2008, 05:45 PM

Stebedeff,

Send the ladder program that it´s possible analyse to you.

Daniel

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help with Fanuc 21it	jborden	General CNC (Mill and Lathe) Control Software (NC)	1	07-01-2008 06:49 PM
fanuc 21iT.401 Alarm	BKCOM	Fanuc	3	11-15-2007 02:39 AM
FANUC 21iT	fjd	Fanuc	4	08-25-2007 08:12 AM
Not Booting sometimes Fanuc 21iT	Ashu	Fanuc	2	09-15-2006 11:03 AM
spindle orintation fanuc 21iT	fjd	Fanuc	1	03-09-2005 06:05 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)