LinkBack URL
About LinkBacks
A little more info would be useful.
Which year was the machine manufactured and which control are you using? I used an E32 with a Fanuc 10-T control. This was an old model. You could probably contact Fanuc or NC Engineering for advice.
| | |
Dear All
i need to find machine parameter for CINCOM e32 - Citizen cnc lathe machine that we had lost in cause of battry damage .including 9000 series parametre setting .
please help me if you have similar machine .
A little more info would be useful.
Which year was the machine manufactured and which control are you using? I used an E32 with a Fanuc 10-T control. This was an old model. You could probably contact Fanuc or NC Engineering for advice.
citizen e32 with fanuc 10t from worlon
new to this site but I just purchased a citizen e32 with a 10t fanuc and will be hooking up in next 4 months. I will then download the parameters and offer to any one in need.
Posting Permissions
| | |
