Need Help!- programming

[rajanvadakkepat]

hi all friends,
i am very new in fanuc control turning work. could anybody help me to do the programming examples with fanucOi TC.
just an examples allthe turning jobs including such as facing,turning,threading,tapping,drilling,reaming etc.
thanks for your kind help.

[majid lotfi]

Hi my friend
I think it is good
N10 G21
N20 G92 S2000
N30 G00 G40 G95 G96 X300. Z200. T0100 S150 M04
N40 G00 X135. Z5. T0101
N50 G71 U3. R1
N60 G71 P70 Q130 U1. W.25 F.3
N70 G00 X30.
N80 G01 X50. Z-5. F.15
N90 Z -30.
N100 X80. Z-65.
N110 Z -85.
N120 G02 X120. Z-105. R20.
N130 G01 X130. Z-110.
N140 G70 P70 Q130
N150 G00 X300. Z200. M09 T0100
N160 M30

[majid lotfi]

Hi my friend
For drilling
N10 G21
N20 G92 S4000
N30 G00 G95 G97 G40 X300. Z200. T0100 S300M03
N40 G00 X0. Z2. T0101 M08
N50 G74 R1.
N60 G74 Z-65. Q10000 F0.15
N70 G00 X300. Z200. T0100 M09
N80 M30

[majid lotfi]

Hi my friend
For grooving
N10 G21
N20 G92 S4000
N30 G00 G95 G96 G40 X300. Z200. T0100 S150 M04
N40 X122. Z-26. T0101 M08
N50 G75 R1.
N60 G75 X96. Z-70. P1000 Q6000 R0. F0.15
N70 G00 X300. Z200. T0100 M09
N80 M30

[majid lotfi]

Hi my friend
For thread
N10 G21
N20 G92 S4000
N30 G00 G95 G97 G40 X400. Z200. T0100 S1275 M03
N40 X45. Z6.0 T0101 M08
N50 G76 P021060 Q50 R0.025
N60 G76 X37.54 Z-40. R0. P1230 Q500 F2.
N70 G00 X400. Z200. T0100 M09
N80 M30

[sinha_nsit]

The given codes are in G-code system B.
System A is more common. Most people on this forum appear to be using this only. System A, B or C is selected through a parameter.

Buy some book and read it. This forum can solve specific problems. You cannot learn entire G-code programming from here.

[320242]

I have 28 yrs programming exp
If you need an on line programmer for all your jobs i am very resonably priced