Will this program work? Newbie question

[HRGlen]

Long time lurker....first time poster.

I want to try to send a program from my cam software to my Kitamura Mycenter tomorrow for the first time. I dont plan to put any material in the
work place....I just want to see if it will even move. I made this simple image in bobcad and im curious if the operations even make sense.

O100
N001 G0 G80 G40 G49 G52 G28 Z0. M5
(JOB 1 HOLE RANDOM POINT PATTERN)
(TOOL #1 0.2500 CENTER DRILL)
T1 M6
T2
S1497 M3
G54 G0 X-3.25 Y-3.25 M8
N002 G43 H1 Z.1
N003 G81 G99 X-3.25 Y-3.25 Z-.08 R.1 F5.98932
N004 X3.25
N005 Y3.25
N006 X-3.25
N007 G0 Z.1
N008 G80
M9
G0 G80 G40 G49 G52 G28 Z0. M5
M1
N009 G0 G80 G40 G49 G52 G28 Z0. M5
(JOB 1 HOLE RANDOM POINT PATTERN)
(TOOL #2 0.2500 DRILL)
T2 M6
T1
S2505 M3
G54 G0 X-3.25 Y-3.25 M8
N010 G0 G43 H2 Z.1
N011 G81 G99 X-3.25 Y-3.25 Z-.6751 R.1 F20.04588
N012 X3.25
N013 Y3.25
N014 X-3.25
N015 G0 Z.1
N016 G80
M9
G49 G52 Z0. M5
N999 G0 G80 G90 G40 G49 G52 G28 Z0.
G53 X-18. Y0
M30

[tobyaxis]

If this is what you want.

[HRGlen]

Yes, thank you. I found a default setting incorrect and it changed my file to look like this:

O100 ( PROGRAM NUMBER )
( PROGRAM NAME: MATT.NC)
( POST: FANUC OM)
( DATE: FRI. 07/18/2008 , TIME: 08:12PM)
( T1 CENTER DRILL , DIAMETER = 0.25 , LENGTH = 5.)
( T2 DRILL , DIAMETER = 0.25 , LENGTH = 5.)
N1 G00 G90 G80 G20 G17
N2 G00 G91 G28 Z0.
N3 G00 G91 G28 X0. Y0.
JOB 1 HOLE RANDOM POINT PATTERN
TOOL #1 0.2500 CENTER DRILL
N4 T1 M06
N5 S1497 M03
N6 G00 G90 G54 X-3.25 Y-3.25
N7 G00 G43 Z0.1 H1
N8 M08
N9 G81 X-3.25 Y-3.25 Z-0.08 R0.1 F6.
N10 X3.25 Y-3.25 F6.
N11 X3.25 Y3.25 F6.
N12 X-3.25 Y3.25 F6.
N13 G00 Z0.1
N14 G80
N15 M09
N16 G00 G91 G28 Z0.
JOB 1 HOLE RANDOM POINT PATTERN
TOOL #2 0.2500 DRILL
N17 T2 M06
N18 S2505 M03
N19 G00 G90 G54 X-3.25 Y-3.25
N20 G00 G43 Z0.1 H2
N21 M08
N22 G81 X-3.25 Y-3.25 Z-0.6751 R0.1 F20.
N23 X3.25 Y-3.25 F20.
N24 X3.25 Y3.25 F20.
N25 X-3.25 Y3.25 F20.
N26 G00 Z0.1
N27 G80
N28 M09
N29 M05
N30 G00 G91 G28 Z0.
N31 G00 G91 G28 X0. Y0.
N32 M30

%