ALARM 101 on 6M

[BluegrassPicker]

I have a 101(Memory) alarm on a 6M control. The book says power up holding reset and delete. Won't this wipe out all of the memory including parameters?

Similar Threads:

• Problem- (ALARM 414 SERVO ALARM) Y-AXIS DETECT ERROR?
• Problem- Daewoo DMV3016 Mill Alarm (Spindle tool clamp/unclamp alarm)
• Need Help!- Fanuc Powermate D Alarm 414 (LV5V Control Power Low Alarm)
• ALARM shuttle drawbar alarm haas
• Need Help!- DAEWOO 8 Steady rest pressure alarm, External feed hold alarm

[fanuservicetech]

NO. Holding "Reset" and "Delete" at power on will clear program memory on Fanuc 6 control. "0" and "Delete" at power on clears all memory including parameters on Fanuc 6 control.
i.e Power on with "reset" & "delete" on Fanuc 6 control to clear alarm 101. Ofcourse you will loose all programs currently in the memory.

[viorel26]

fanuservicetech "Reset" and "Prog" at power on don`t clear programs only?

[BluegrassPicker]

Thanks fanucservicetech, that fixed it. Don't you just love bubble memories?

[SMAGUIRE]

We used this procedure to clear the memory 101 error on a Whitney 3500 ATC / 631. This also cleared the 9100 programs. How do we restore them?

Thanks