Continue subprogram after push "CYCLE-STOP"

[dzga]

If i'm press CYCLE-STOP button example in line number N6000, after this I'm dont continue program from line N6001. If I'm press CYCLE-START - program always started from first line.

My main program:
%
M198 P0003;
M30;
%

My sub-program on Data Server HDD:
%
O0003
...
...
N6000 ... <------------ in this line i'm press CYCLE-STOP
N6001 ...
...
N7000 M99;
%

I'm try to insert "GOTO 6001" in third line of sub-program, but raised error 123 - "CAN NOT USE MACRO COMMAND IN DNC ". What i'm do wrong?
Also, cant put cursor on line N6000, after push "CYCLE-STOP" - subprogram instantly interrupted and returned to main program.
Or exist another way to continue my subprogram from line, where program interrupted, or CNC is sudden power off?

[dzga]

isn't nobody don't know it?
Or all users of FANUC 18i,21i, ... be tormented as me?

[xavierdemoura]

It´s not possible run an custom macro from DNC function. I do this test yesterday. Try use relocate program using type P or type Q, but don´t use M198 to call the program.

Daniel