Results 1 to 3 of 3

Thread: Connection Unit Information (A20B-1003-0240)

  1. #1
    Registered
    Join Date
    Dec 2007
    Location
    Switerland
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Connection Unit Information (A20B-1003-0240)

    I searching some information about the Connection Unit PCB (A20B-1003-0240) found on a Fanuc 15-MA controller.

    Do someone have pinouts, signals, or other information?
    Thank you!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default

    Fanuc manual will only give you generic connection information. on 15-MA controls pin assignments is done by PMC (ladder) from Machine tool builder. It will be best to get a hold of your machine tool builder's electrical wiring diagram. If you still want the generic information, it is in Fanuc 15 connecting manual B61213E (18883268287 Fanuc America to purchase)



  3. #3
    Registered
    Join Date
    Jan 2007
    Location
    india
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default

    you can get this information in machine tool builder wiring diagram , other wise fanuc connection manual for system15 can give you generic help.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed