Results 1 to 10 of 10

Thread: Looking for Fanuc 10m manuals

  1. #1
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Looking for Fanuc 10m manuals

    Hello all.

    I have acquired a KIWA Excelcenter 4L Bed Mill with Fanuc 10m controller.

    This is my first machine and my first experience with a Fanuc controller.

    Needs some work...

    I am looking for any and all manuals for the fanuc 10m controller.

    I am hoping someone can turn me on to these. I appreciate any help or info.

    Is there anyone else out there running one of these mills?

    Cheers,

    Dan

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Twp, MI....USA
    Posts
    24548
    Downloads
    0
    Uploads
    0

    Default

    Do not post any links to fanuc manuals here, as they are copyrighted info. Sorry, but we've had complaints from Fanuc themselves in regards to info being posted here.

    Gerry

    Mach3 2010 Screenset
    http://home.comcast.net/~cncwoodworker/2010.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    No problem. I did read the sticky at the top of the forum.

    Perhaps someone one could point me in the right direction or send me a PM.

    Cheers,

    Dan



  4. #4
    Registered
    Join Date
    Feb 2008
    Location
    Scotland
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default

    I use a Leadwell CNC mill with a 10M control on it. Is there anything specifically you need to know?



  5. #5
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    I will take delivery of the machine on Wednesday. Everything is an unknown to me right now. I am looking for any documentation, schematics, whatever, to start with. Schematics of the controller would be very helpful.



  6. #6
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default

    1888fanucus (1888-326-8287) to purchase manuals
    Manual number Description
    B-54815E Fanuc 10/11 maintenance manual
    B-54810E Fanuc 10/11 parameter/alarm description
    B-54824E Fanuc 10/11 operator's manual (programming)



  7. #7
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    Fanuservicetech,

    Thanks for the catalog numbers on the manuals.

    I've been looking on line and I've come across the Connecting Manual for Fanuc 10/11/12 manual.

    What is the content of the Connecting Manual for Fanuc 10/11/12?
    Sounds like something I may need, just not sure what it is exactly.

    Cheers,

    Dan



  8. #8
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default

    conneting manual is basically for machine builders/ retrofitter. It does not have any maintenance information or alarms or parameters. If you can pick up the connecting manual for $10-$15, then by all means please buy it.



  9. #9
    Registered
    Join Date
    Jan 2011
    Location
    india
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    dear sir,

    we have a HAMAI milling machine with fanuc 10m control. while running machine running condition battery alarm is came .our electrcian changed batteries in machine power off condition.so parameters are loss. we have parameters and re-initialised.all axis are moving assept spindle. in our parameter manual DATA TABLE CONTROL DATA parameters are upto DOOO to D116. but in system it is showing upto DOO74.how can i increase the data table upto D116.because spindle parameters are DOO82 to D0086. please give us feedback to solve the problem.



  10. #10
    Registered
    Join Date
    Jan 2011
    Location
    india
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    in that HAMAI machine data parameters are
    D0000 NO OF DATA=10
    D0002 PARAMETER 00000010 NO OF DATA 9
    D0010 PARAMETER 00000000 NO OF DATA 17
    D0084 6827
    D0086 1410
    D0088 6000
    REMAINS ALL DATA ARE 0

    PLEASE SUGGEST ME.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed