These would be related to the MTB part of the machine
Please post the make and model of your CNC
also a picture of the interface and a copy of your ladder would be helpful
Hello!
I have a CNC lathe with Fanuc 21iTB controller.
The machine has UNIMAG bar feeder electrical interface.
Subsequently I bought "Servo 80" short bar feeder.
I have problem to activate bar feeder ioption in the controller (i.e. setting of D-parameters). How to access D-paraters and what to change there for Fanuc 20 i TB.
Looking forward for help.
These would be related to the MTB part of the machine
Please post the make and model of your CNC
also a picture of the interface and a copy of your ladder would be helpful
****************************************************************
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
****************************************************************
*__________If you feel inclined to pay for the support you receive__________*
*______Please give to charity [url]https://www.oxfam.org.au/get-involved/______*[/url]
****************************************************************
Machine make is Spinner, Turkey (Spinner is a German brand)
Model is : TC-65-MC
For picture of the interface, i have to check the electrical panel.
I would suggest you contact the manufacturer directly
cnc-hotline@spinner.eu.com
Give them your
CNC model and serial number
perhaps they will help
****************************************************************
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
****************************************************************
*__________If you feel inclined to pay for the support you receive__________*
*______Please give to charity [url]https://www.oxfam.org.au/get-involved/______*[/url]
****************************************************************
your machine has the barfeed interface standard.
if you contact Spinner direct they can direct you with a simple process of turning on the parameter.