Fanuc 10M Parameters...no batteries

[spank]

After going over a Kiwa Excel Center that my friend and I picked up a little while back, it looks like the batteries were removed from the machine at some point. What is the process for reloading the parameters into the machine? I have heard that this can be tough with Fanuc 10M. Any help is really appreciated.

Similar Threads:

• Need Help!- DGN parameters Nakamura Tome TMC15M Fanuc OTC PMC-M how to enter PMC parameters?
• Batteries
• Fanuc 18i-TB Batteries
• Fanuc 0i Mate-MB battery/batteries
• SV2412 Fanuc Batteries

[fanuservicetech]

Please follow the link for procedure on how to reload parameters.
http://www.kfasllc.com/memory_backup_restore_F1011.htm
Ofcourse you will still need backup parameter list for the machine. If you do not have one you will need to contact the machine builder for a copy.

[spank]

Thanks a lot. We have contacted Kiwa and are hoping that they can point us in the right direction.

[samba siva rao]

how to load DATA parameters in fanuc 10m system from D000 to D0106.