Displaying PMC ladder in DGNS Page

[dinesh]

Gentle men,
I have fanuc OM-C system(M/C THK GRINDING). I am getting "Not ready" alarm.There is no manual for this.Also with DGNS page PMC ladder not displaying. I would like to know is threre any parameter for PMC Display in DGNS page. Thank you in advance for your help
Best regards
Dinesh

[viorel26]

Param. 60 bit #2 = Dynamic ladder display is not executed (0) / is executed (1)
Check the emergency stop buton.

[dinesh]

Hi Viorel,
I tried 60 bit# 2, but PMC is not displaying.And same bit is working with other machine on which pmc is already is displayed (tried 60#2 0/1).Is there any other option.
Thank you for your reply
With best regards
dinesh