034 P/S Alarm

[KJ45]

I am getting a 034 alarm that seems to be caused by the cutter comp command (G42) in the program.

Anyone know what I am doing wrong here?

Here is what I have:

N102 G0 G17 G40 G49 G80 G90
N104 T1 M6
N106 G0 G90 G54 X-9.3 Y0. S1069 M3
N108 G43 H1 Z.25
N110 Z.1
N112 G1 Z0. F6.42
N114 G42 D1 X-9.05
N116 G3 X9.05 R9.05
N118 G40 X-9.05 R9.05
N120 G1 Z.1
N122 G0 Z.25

I get the error at line N108.

Any thoughts?

[dcoupar]

N118 cancels comp while G3 is active. You must turn comp on and off with G00 or G01

[KJ45]

Thank you so much for your help.

If I move N114 up before lines N110 and N112, will this solve the problem?

I am assuming it just needs to be entered before a G1 line (N112 or N114) and you can use it with a G3 that way?!

[cogsman1]

Move the "G40" to line N120

[dcoupar]

N102 G0 G17 G40 G49 G80 G90
N104 T1 M6
N106 G0 G90 G54 X-9.3 Y0. S1069 M3
N108 G43 H1 Z.25
N110 Z.1
N112 G1 Z0. F6.42
N114 G42 D1 X-9.05
N116 G3 X9.05 R9.05
N118 X-9.05 R9.05
N120 G1 G40 X-9.3
N122 G0 Z.25