G62


Results 1 to 2 of 2

Thread: G62

  1. #1
    Member samu's Avatar
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    314
    Downloads
    0
    Uploads
    0

    Default G62

    I want to use G62 (automatic corner override) on my hardinge VMC1000 with fanuc O-MD controller but it doesn't work.Parameters 213 (minimum deceleation ration of inside circular cutting speed), 214(deceleration ration of inside corner automatic override), 215(inside judgment angle of automatic corner override at inside corner part), 580 and 581 (end point deceleration distance) seems to be correctly set. is there any other parameters to activate automatic corner override??



  2. #2
    Member
    Join Date
    Jun 2005
    Location
    us
    Posts
    232
    Downloads
    0
    Uploads
    0

    Default

    Mine only works using cutter comp . Going around small rad. it slows down about 80 percent.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G62

G62