Programs are input through EDIT mode.
Either by keyboard input or RS232, both via EDIT mode.
I am having trouble inputting a program into the lathe. The person before me did not leave any trail on how to do so. All the manuals refer back to tape reading. Is there a way I can input a program through MDI and save it onto the Machine?
Let me know what you guys think.
Thank you
Similar Threads:
- Nakamura-Tome TMC-15
- Need Help!- Nakamura Tome TW-20
- Problem- Nakamura Tome
- Need Help!- NakaMura Tome TMC-30
- Nakamura TMC 4 TOME
Programs are input through EDIT mode.
Either by keyboard input or RS232, both via EDIT mode.
What make/model control does it have?
i have another program on there though. can i put multiple programs? do i have to delete the current one?
the controller is a Fanuc 6t
Hi,
Fanuc 6T can store multiple programs, limited by memory.
Do you have the PC with transfer software and a proper RS232 cable that can do the job ????????
If so, open the G-code program on PC-side/transfer program, then on cnc-side, EDIT, O1234 INPUT,
LSK starts blinking, press SEND/Transmit on PC-side.
Program O1234 is now stored in the cnc memory.
Regards,
Heavy_Metal.