Manuals for Fanuc 0T-A

[nadnar]

Could somebody be so kind as to email me manuals for my Fanuc 0T-A? I have them in book form but hate to keep getting them dirty on the floor when I need to use them and have always wanted these in pdf format. I would really appreciate any help offered.

Thanks

mwmfg@cox.net

[barbter]

I tried to get them electronically.
Fanuc UK told me that because they were so old, it's hard copy only.
The electronic versions start at 21/18/16 series.

However, the 0TA operating manual and parameter manual were only £60 ($120ish) for the pair which I thought was reasonable. Might pay to buy a set and have one for the workshop, and one for the office?

[nadeem655]

Dear Sir.

I have incomplete parameters of following machine.

Fanuc OT Model A Type A02B-0083-B501
No 8120719 1988-12
(PMC-L Mother Board A16B-1010-0150/06)


Manufactured by Matrix Churchill Ltd, Coventry cv4 9DA
England
Type Three Series
Serial MAC NO 33136

can someone find all parameters diagnosis parameters and PC parameters and procedure to restore backup.


Regards

Nadeem Ashraf
Assistant Manager
Millat Equipment Ltd(www.millatgears.com)
10 km raiwind road Lahore Pakistan
Ph: +92-042-5323212
Fax:+92-042-5322714

[gridley51]

Nadeem you need to email service@bsamachinetools.co.uk
BSA now own Churchill machines.All spares etc are readily available.
Their website is www.bsamachinetools.co.uk
Mark.

[Tazz_mania]

Dear Sir.

I have incomplete parameters of following machine.

Fanuc OT Model A Type A02B-0083-B501
No 8120719 1988-12
(PMC-L Mother Board A16B-1010-0150/06)


Manufactured by Matrix Churchill Ltd, Coventry cv4 9DA
England
Type Three Series
Serial MAC NO 33136

can someone find all parameters diagnosis parameters and PC parameters and procedure to restore backup.


Regards

Nadeem Ashraf
Assistant Manager
Millat Equipment Ltd(www.millatgears.com)
10 km raiwind road Lahore Pakistan
Ph: +92-042-5323212
Fax:+92-042-5322714

Please tell me you have parameters for fanuc 5-t, I'm in need desperatly,if so can you email them to me @ RoyLBible@yahoo.com