Since i bought a Miyano with a 6t it has had a stored stroke limit. After you turn on the machine and zero it you have to mdi a g23. If you move even a .1" off if home without commanding a g23 it over travels. So I guess it defaults with g22 after you home on power up? Anyway anyone know what setting or parameter to change to a large number so it never sees that?
either the stroke limits are set wrong or the parameter that tells the machine the forbidden region is inside or outside the set limits is wrong.
you could put a G23 at the top of the program and that should solve the issue.
or change the stroke limit parameter and/or stroke forbidden region parameter
Yes that is how we have been running it. It is just that we are getting more and more people running machines and they "forget" about the g23 so u would like to take out the default limit.