| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-28-2007, 09:20 PM
| |||
| |||
hello, we are face grooving profile grooves on aluminium castings, we have taken co-ordinate points for the profile from the Autocad drawing,we face a problem of radii at different points in the groove measuring either in excess or reduced to the extent of tool nose radius of 0.4mm when compared to the drawing which is attached with this message any suggestions thanks rags  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tool nose radius comp | joe1970 | G-Code Programing | 8 | 02-24-2010 09:43 PM |
| Fanuc 5 axis radius compensation | d.a.v.e | Fanuc | 1 | 10-06-2008 02:52 AM |
| G143 Nose Radius Comp. - Hitachi Seiki HT23J | jbird68 | G-Code Programing | 3 | 08-02-2007 11:41 AM |
| Fanuc 5T Tool Nose Compensation | John3 | Fanuc | 1 | 07-15-2007 10:58 PM |
| Tool Nose Radius Fault with Program | Josh-PTP | Haas Mills | 4 | 06-30-2007 05:03 PM |
| | |
Linear Mode
