Fanuc 0P - 430 Alarm

[hdm]

Hello,

I have a problem whit a CNC Fanuc Series 0P. Few days ago, I'm replaced the encoder (Z-Axis - because was broken) for a new one; right now when I traided to move this Z-axis(in manual mode) this move to fast. After that, appears this, Alarm 430 and 403.
Somebody can helpme. I believe that it is a setting problems!!

Best regards
Hernan

[hdm]

Hello, everybody

I found what is the problem, only change the phase, and VIOLA.....everything ok.
Thanks

Hernan