HSM Functions AICC,AI NANO, HPCC, RISC CARD etc.....

[bjk1903]

Is there any document that you have, to understand the differences between
AICC, AI Nano CC, NURBS, High Speed Machining, Risc Card, HPCC, High Speed Machining Functions. Any comparasion charts, or any documents explaining the details of these functions is wellcomed.

Thanks for your helps

[dcoupar]

Here's something on AICC and AIAPC.

[bjk1903]

Thanks, I already had this document. I hope somebody might offer more documents similar to this

[Per_N]

If you send me you email-adress, I can send you the High Speed Cutting manual from Fanuc. But it is about 3mb so I can't post it here.

[bjk1903]

bora@uzaymak.com

[figeacaero]

I'm sorry, but can you send me this document to me too. Best regards.
richard.kolhmann@figeac-aero.com
If you're interested I've a manual, an explanation of differences between SIEMENS functions (COMPCAD, COMPON else...) and the contour control modes of FANUC 16, 18 and 30i

[kklaver]

One of the best resources for the AI features is the Japan Fanuc website.
http://www.fanuc.co.jp/eindex.htm

Here is a link to the AI APC feature.
http://www.fanuc.co.jp/en/product/cn...ncfeature.html

Here is the link for the AI NANO CCand AI NANO HP CC Feature.
http://www.fanuc.co.jp/en/product/cn...ocnc.html#jerk

Here is a link for Ultra Fine AI NANO feature.
http://www.fanuc.co.jp/en/product/cn...c/nanocnc.html

I have used almost all of the AI features and my be able to shed some light if you have any questions.

KKlaver

[Robbud]

Hi, can anybody email me the High Speed Cutting manual from Fanuc, or the document explaining the differences between SIEMENS functions (COMPCAD, COMPON else...) and the contour control modes of FANUC 16, 18 and 30i?

thanks

robbud[at]gmx.net