G71 type 1 Type 2

[Al4350]

Hi guys,
im using a phoniex lathe with fanuc Oi-tc control.
I'm trying to do a pocket for one of the better terms.
code is similar to this
G0 x121. z4.0
g71 u r
g71 p q u w f
n10 go x65.0
go1 zo.o5
go1 x75.0 r2.2
go1 z-10.0
g02 x67.4 z-15.0 r18.8
g02 x105 z-30. r18.8
go1 x115.1r2.2
z-33.
ect

machine does everything properly except for the step down after z-10. it tries to do it in one cut.

the conversational on the lathe is rediculess.

any help would be great thanks.
i have tried splitting the radius up into two canned cycels but same thing.
I've never expirenced this before

Similar Threads:

• ER11: A Type vs B Type
• Need Help!- Change between G71 type I and type II on leadwell LTC-10S.
• Lead Screw type and bering type????
• G71/G72 type I vs. type II cycles
• G71 type I and type II cycles

[ProToZyKo]

For type II you need to put X and Z in the N10 line
G0 X65.0 Z4.0

[sinha_nsit]

May like to read this for detailed information.

[Al4350]

For type II you need to put X and Z in the N10 line
G0 X65.0 Z4.0

Thanks for the info, something so simple.