Trouble with fanuc 31i model b5
I am getting ds300, (x) & (y) , ds307 for (x) & (y) and ex1000 e stop is pressed.. that's the five alarms getting. the drives will not come on, says can't start servos with alarm active.. it won't go into auto mode.. only in mdi mode. The table load button is flashing in 1 second intervals. Can't figure this one out. E stop is not pressed. Second time it's done this, first time it just went away in its own. I've hard shut down the machine and everything. No luck
Similar Threads:
Reply with Quote
