Need Help! Need Help related to "Pitch Error Compensation" of Fanuc Controller


Results 1 to 2 of 2

Thread: Need Help related to "Pitch Error Compensation" of Fanuc Controller

  1. #1
    Registered
    Join Date
    Nov 2017
    Location
    Pakistan
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Need Help related to "Pitch Error Compensation" of Fanuc Controller

    Hi,

    We currently have a turning machine with Fanuc 18Oi control. We have measured the positional error in the machine in each axis using laser interferometer. Now we want to do the pitch error compensation but the problem we are facing is that the pitch compensation table is not available in the controller. Pitch compensation parameters like 3620, 3621, 3622 etc are available in the controller but the pitch compensation table (which we normally access by pressing SYSTEM key followed by pressing next menu key and then followed by PITCH soft key) is not available.

    Any help in this regard will be highly appreciable.

    Regrads
    Awais

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    841
    Downloads
    0
    Uploads
    0

    Default Re: Need Help related to "Pitch Error Compensation" of Fanuc Controller

    You will have to contact Fanuc and have them enable it. Fanuc charges you for that feature. Fanuc Option



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Help related to "Pitch Error Compensation" of Fanuc Controller

Need Help related to "Pitch Error Compensation" of Fanuc Controller