Hello Friends
We are using Anderson PTP3013 Cnc for furniture manufacturing.
Yesterday we had a new problem without making any changes on machine.
We are using Woodcam software with Fanuc controller.
Normally we set the machine to "Edit mode" and turn our machine key to "1" for sending the panel program to Fanuc
We dont know how but we can't send it to fanuc. Fanuc doest not accept it or the machine can't ready for edit mode.
System Gives This Error
- I checked the fiber optic cable between pc and fanuc there is no problem.
- I checked the 1-0 Key and also i try keep connected them with manually.
- I checked Fanuc cache there is still avaible space.
- I checked my backup hdd there is still same problem.
We cant send the program to Fanuc,
Is there any one can suggest me to do something?
Similar Threads: