Hello everyone

I have a MIYANO TSV-35 with a Fanuc O-MC controller. There was a power surge in the workshop and the machine's parameters got all messed up.
So, I erased everything and re-uploaded the parameters and checked all the voltages. Everything checks out.
Now I'm stuck with a few problems that I can't seem to solve.

1. Memory capacity before the surge was 32000b, and now it reports only 4095b.
2. When I press POS I only get Absolute coordinates. Everything else is just gone.
3. When I press OPR/ALARM twice, I get the Operator's panel menu, with the ON/OFF options, but a blank list.

I don't know if these are software or hardware issues, so if anyone has any advice whatsoever it would be of great help.
Thank you in advance

Similar Threads: