this alarm machine specific. you should look into ladder and look for answer there.
we have the follwing alarm,
alarm # 1013 TR.. NOT BRAKE.
We can't find it in any of our manuals. Could someone advise us on this. Thanks.
Similar Threads:
this alarm machine specific. you should look into ladder and look for answer there.
I thank you for your reply. Now i just found out that you just can't go to the para/dnos page and page to the ladder diagram. I was told that i had to set a parameter to activate taccess to the ladder. is this really valid info. They said they couldn't remember which parameter. Could you help with this?. Thanks.
parameter 60#2 dynamic ladder display
if you have paper copy of ladder you may check line where G119.0 is to be activated
Thanks, we have a small manual marked PMC. Whether it is for this machine i will have to check. this machine was bought, supposedly in working condion. But, i haven´t been able to do much with it yet. i guess my priority will be to try and get the turret to jog without getting alarms,
1013 TR. BRAKE, which i know is turret brake, thanks to your help.
1014 PLS. TURRET CW, comes up when i jog turret and it stops at pos. "supposedly".
1011 TURRET NOT RDY.
I am trying to clear the turret problem first before going on to other faults.
I really appreciate your help. regards.
My machine leadwell LTC 20P O-T series lose the parameter
After key in the parameter, my spindle speed can't reading display show the reading is 1 or 2 only whatever i comman m3 s50 or s500 or s1000 also reading 1 or 2 but spindle chuck is got turn